MGI Meteor Unlimited Colors SE konkrētas zonas lakošana un folijas spiešana

Meteor Unlimited Colors Se+

  • Universāls integrējamais digitālās tonera drukas un folijas karstspiešanas risinājums
  • Vieda CMYK drukāšanas un tūlītējas folijas spiešanas kombinācija
  • Ļauj jums standarta drukas darbiem radīt pievienoto vērtību
  • Nodrošina izcilu produktivitāti, satriecošu attēla kvalitāti un pārsteidzoši ērtu ekspluatāciju
MGI Meteor Unlimited Colors SE konkrētas zonas lakošana un folijas spiešana

Iespējas

Iespējas

Jaunas klientu mērķgrupas, pateicoties inovatīvam universālajam drukāšanas un folijas spiešanas risinājumam

Meteor Unlimited Colors Se+ ir vienīgais tirgū pieejamais produkts, kas apvieno drukāšanas mehānismu ar profesionālu folijas spiešanas risinājumu. Jūs tagad varat apvienot profesionālu CMYK drukāšanas rezultātu ar pievilcīgu dekoratīvo efektu, tādējādi uzrunājot pilnīgi jaunu klientu mērķgrupu un radot augstas kvalitātes produktus, kas sniedz izcilas priekšrocības. Meteor Unlimited Colors Se+ nodrošina jums izcilu produktivitāti, lielisku pāreju no tonera uz foliju un spēju vienā pārklājuma reizē radīt satriecošu un ļoti ienesīgu metālisku efektu. Šis digitālais risinājums iezīmē Konica Minolta pārkāpšanu CMYK drukāšanas robežām, un tas ir ideāli piemērots drukāšanas pakalpojumu sniedzējiem, kuri meklē iespējas, kā dažādot savus drukāšanas pakalpojumus un radīt neierobežotu metālisku krāsu klāstu.

MGI Meteor Unlimited Colors SE konkrētas zonas lakošana un folijas spiešana

Specifications & Downloads

Specifications & Downloads
METEOR DP8700Se+ 4-COLOR PRINTING
Colour print speed Up to 71(1) A4 sheets per minute
Print quality and line screens Print resolution up to 3,600 dpi and line screens ranging from 130 to 270 lpi
Printable formats Min. 100 x 148 mm – 3.9 x 5.8’’
Max. 330 x 650* mm – 13 x 25,6’’(2)
Supported substrate thicknesses Paper from 65 to 350 g/m² or 350 μm
Synthetic: specific substrats such as Teslin® and Folex®
Envelope from 100 to 400 μm with/without window
Paper input 2 Internal Trays (trays #1, #2)
1,500 sheets total capacity (500 + 1,000 sheets)
3 trays (#3, #4, #5) linking high capacity feeder with air feed system
3,930 sheet total capacity 2 x 1.390 + 1.150(2).
Max. size is 330 x 650* mm from tray #5, otherwise 330 x 487 mm
Registration Precise registration with ASCA (Automated Skew and Centering
Adjustment) system. Comparable to offset, applies to
all printed works (front-back, page-page at ± 0.5 mm)
Paper output High pile motorized stacker for hosting up to 60 cm of paper height
Electrical specifications Feeder: 1x (230V / 1P + N + E - 10 A)
Printer: 1x (230V / 1P + N + E - 25 A)
Computer & Rip: 3x 1x (230V / 1P + N + E - 16 A)
Operating environment Required temperatures:18° to 30°C
Optimum between: 20° to 22°C
Operating Humidity: 30% to 50% RH
Optimal condition: 40%
Dimensions & weight L x W x H: 5,56 x 1,31 x 1,93 meters
1,780 kg (Meteor DP8700 Se+ and iFOIL T)
External Fiery EFI Fiery IC-308 controller 100% compatible with market standard software solutions like Adobe InDesign
 

 

IFOIL-T HOT FOILING STATION
Supported thicknesses with foil without toner overprinting Min. 80 g/m² equals to 80 μm prior to printing and possible lamination
Max. 350 g/m² equals to 350 μm prior to printing and possible lamination
Supported thicknesses with foil and toner overprinting Min. 150 g/m² equals to 150 μm prior to printing and possible lamination
Max. 350 g/m² equals to 350 μm prior to printing and possible lamination
Printing speed Up to 50(1) A4 sheets per minute
Paper formats Min. 110 x 220 mm
Max. 330 x 650* mm(2)
Substrats The hot foil process is compatible with most the of substrates supported by the METEOR Digital Press (non-coated or coated paper, envelops, PVC, Teslin, etc.)
Hot foils Utilizes compatible hot foils available on the market.(3)
Rolls Hot foil are delivered on rolls. Standard roll is 320 mm width and 305 meter long, using an one inch core. Possibility to use smaller widths such as 100 mm and add them upon the same axis for laying up to 2 simultaneous colours.
Standard 1’’ core, 3‘‘ core as an option
Foil manager software suite Meteor Manager is a powerful supervision softwareplatform. Within a single tool, it gives access to the operator to the entire parameter to manage and setup the productionfrom 4-color printing through hot foil finishing. All the parameters can be also stored for further reprinting whichsaves you time and improves your efficiency
Electrical specifications iFOIL T: 2x (230V / 1P + N + E - 25 A)
1x (230V / 1P + N + E - 16 A)
Stacker: 1x (230V / 1P + N + E - 6 A)
Operating environment Required temperatures:18° to 30°C
Optimum between: 20° to 22°C
Operating Humidity: 30% to 50% RH
Optimal condition: 40%
Dimensions & weight L x W x H: 5,56 x 1,31 x 1,93 meters
1,780 kg (Meteor DP8700 Se+ and iFOIL T)
 

All specifications refer to A4-size paper of 80 g/m² quality.

(1) Print speed may vary according to the substrate and print parameter used
(2) Using tray #5 and max. 250 gsm/250 μ in simplex
(3) Please contact Konica Minolta to check your substrates/toner/foil compatibility

  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications, network protocols as well as network and system configurations.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that all specifications mentioned will be error-free.
  • Microsoft, Windows and the Windows logo are trademarks, or registered trademarks, of Microsoft Corporation in the United States and/or other countries.
  • All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.


(1) Without calibration and stabilization
(2) Using tray #5 and max. 250 gsm/ 250 μ in simplex

Get the product brochure now to have all information at hand.

Meteor Unlimited Colors Se+ brochure

Sazināties

Sazināties

Jā, es piekrītu saņemt noderīgu informāciju mārketinga vajadzībām šādos veidos:*

Par Konica Minolta Baltia produktiem un pakalpojumiem un citiem asociētie uzņēmumi grupas ietvaros, kas ir pielāgots manam personiskās intereses . Jūsu dati tiks apstrādāti saskaņā ar mūsu konfidencialitātes politiku .

Nepieciešami teksta lauki ar * !