MGI JETVARNISH 3D One

    AUGSTA PRODUKTIVITĀTE ar vienas caurules drukāšanu
    DIGITAL augstas klases dekorēšanas ierīce ar ātrumu līdz 2,077 A3 loksnēm stundā
    UV INKJET TECHNOLOGY apvienojumā ar Konica Minolta pjezoelektriskajām drukas galviņām pēc pieprasījuma
    AIS SmartScanner automatizētai lapu reģistrēšanai lapās
    IEKĻAUTA PROGRAMMATŪRAS SUITE, kas ļauj jums sekot saviem darbiem, pārvaldīt darba rindu, izveidot darba biļetes, atsaukt atkārtotas izdrukas un pielāgot AIS skeneri vienā vienkāršā un pašsaprotamā rīkā.
    LAKA OFSETU UN DIGITĀLĀS PRINCES ar laminēšanu un bez tās padara jūsu darbplūsmu ļoti elastīgu
    MAIŅOJAMA LAKA biezums no 21 līdz 116 mikroniem 2D un 3D taustes efektiem vienā piegājienā
    EKO-DRAUDZĪGS IN-LINE LED ŽĀVĒTĀJS videi, kas nesatur ozonu

Iespējas

Iespējas

Iespējas

Neaprobežojieties tikai ar skaisti iespiestiem darbiem - ir pienācis laiks piedāvāt klientiem lielāku vērtību un radošumu! JETVARNISH 3D One izdrukātos darbus pārvērš par iespaidīgiem un neatvairāmiem drukas izstrādājumiem, kas nekavējoties piesaistīs jūsu klientu uzmanību. Izmantojot JETVARNISH 3D One, jums būs viegli pamanīt digitālo izdruku pārklājumu, iezīmēt noteiktas vietas vai pievienot 3D efektus - tas viss ļauj jums piedāvāt pievilcīgus drukas produktus, kas ir spilgtāki un taustāmāki.

Specifikācijas un lejupielādes

Specifikācijas un lejupielādes
PRODUCT SPECIFICATIONS – JETVARNISH 3D ONE
Printing technology MGI’s exclusive inkjet engine technology; Drop-on-Demand (DoD)
technology; Piezoelectric printheads,developed and manufactured
by Konica Minolta; Single pass printing; Flexible & scalable printing
architecture
Coating thicknesses Depending on your file, the inks used and the type of surface of
your sheet, the coating thickness can vary. On laminated and
aqueous coating: 21 μm – 116 μm for 3D raised effects and tactile
finish. On toner and coated paper: 30 μm – 116 μm for 3D raised
effects and a tactile finish
Production speed In 2D/flat mode: Up to 2,077 A3 sheets per hour (with 21 μm)
In 3D/raised mode: Up to 1,260 A3 sheets per hour (with 51 μm)
Up to 547 A3 sheets per hour (with 116 micron)
Registration SmartScanner coupled with Artificial Intelligence (AIS) for fully
real-time automated sheet-to-sheet registration process. No crop
marks required.
Formats Min. 21 x 29.7 cm
Max. 36.4 x 76.0 cm
Max. Printable Width 35.3 cm
Substrate thickness Min: 135 g/m2 and not less than 150 μm or 6 mil before printing
& lamination; Max: 450 g/m2 and not more than 450 μm or
18 mil before printing & lamination; Motorized height-adjustment
print heads
Substrates* Printing on most matte or glossy laminated surfaces, with or
without aqueous coating, layered paper, plastic, PVC and other
coated materials.
Varnish on toner Spot 3D One coat directly onto most digital prints with no
lamination or coating required.
UV coatings and capacity varnish delivered with a 10-litre tank capacity
High capacity
Automatic feeder
Feeder able to handle a paper pile up to 30 cm;
2,500 sheets at 135 g/m2
Paper Tray Tray able to handle a paper pile up to 15 cm or approximately
1,250 sheets at 135 g/m2
All paper formats from A4 up to 36.4 x 75 cm
Paper path 100 % flat paper path; Vacuum feed system; Air feed system;
Automatic double sheet detection; In-line LED dryer; “On-the-fly”
drying & curing via integrated LED
Maintenance &
remote technical
support
Daily maintenance completed in less than 10 minutes; Majority of
procedures are automated; Automatic cleaning system; From cold
start to production in less than 10 minutes; Remote troubleshooting
& support via included video/web camera (high speed internet
connection required)
Operator panel Integrated user-friendly LCD touch-screen
Dimensions (L x W x H) 4.02** x 1,41 x 1,80; 1 metre clearance required on all 4 sides
Weight ± 1,200 kg
Electrical
requirements
V: 220-240V 50-60Hz; A: 20; plug: 2 plugs CEE 17 IP44 32A (32A
250V, 1P+N+PE); RCD 30mA; C curve 32A breaker
Operating Temperature: 18 to 30°C
Environment Relative humidity: between 30 – 55% (no condensation)
Respecting the
environment
Eliminates resource waste (wasted electricity, paper and varnish);
No plates (offset) or screens (screen printing); No cleanup or preparation
between jobs; Drastic reduction in amount of consumables
and use of bulk packaging; Coating without volatile solvent.
Options Automatic PDF File Converter; VDP barcode camera;
AIS SmartScanner Lighting for metallized substrates

The default sheet format is A3, unless otherwise stated
1) with an additional option installed
2) speed will vary according to printing parameter used
3) confirm substrate/toner compability with KM
* The used substrate needs to be either coated or laminated.
Otherwise the media is absorbing the varnish and the desired effect might get lost.
** No paper extensions available.
 

  • All specifications refer to A4-size paper of 135 gsm quality.
  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications and network protocols as well as network and system configurations.
  • The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size (5% coverage of A4). The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
  • All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.