Home Aparatūras Spot lakošana un foiling AccurioShine 3600

AccurioShine 3600

Viena lieta ir augstas kvalitātes drukas darbu sagatavošana, bet kā apmierināt prasīgo klientu vajadzības, kuri meklē pievienoto vērtību un izsmalcinātību? Ar AccurioShine 3600 jūs radīsiet iespaidīgus un pamanāmus drukas produktus, kas uzreiz piesaistīs ikviena uzmanību.

  • DIGITĀLA augstas klases iekārta ar ātrumu līdz 2 077 A3 formāta loksnēm stundā, kas nodrošina īsu un vienkāršu darbu sagatavošanu.
  • KONICA MINOLTA TINTES TEHNOLOĢIJA ar ekskluzīvām Konica Minolta pjezoelektriskām drukas galvām, kas nodrošina augstāko kvalitāti.
  • DAŽĀDS LAKAS BIEZUMS no 21 līdz 116 mikroniem, lai iegūtu 2D un 3D efektus vienā piegājienā.
  • VIENKĀRŠA UN ĒRTA LIETOŠANA – nav nepieciešamas formas un klišejas, nav tīrīšanas starp darbiem. Viss, kas nepieciešams, ir digitālā maska, lai pievienotu dažāda biezuma laku tieši uz tonera vai ofseta izdrukām. Tas ļauj efektīvi izpildīt īsus un vidējas tirāžas darbus, ātri sagatavot pasūtījumu darbam iekārtā bez vajadzības izgatavot plates, formas un veidnes. Ļauj izpildīt sarežģītus darbus uz dažādiem materiāliem, tonera un ofseta izdrukām.
  • VIDEI DRAUDZĪGS UN SAUDZĪGS - AccurioShine 3600 ir aprīkota ar slēgta sistēmu, kas neatstāj tintes vai lakas paliekas un ir izstrādāta tā, lai starp darbiem novērstu tīrīšanu vai materiālu izšķērdēšanu, tādējādi samazinot papīra, lakas un elektrības patēriņu.
Sazināties

Iespējas

Iespējas

Galvenās AccurioShine 3600 funkcijas

Galvenās AccurioShine 3600 funkcijas

  • AR MĀKSLĪGO INTELEKTU APRĪKOTS SKENERIS (AIS)®

    • Pilnas lapas skeneris
    • Nav nepieciešamas apgriešanas atzīmes
    • Pārklājuma reģistrācija no lapas uz lapu
    • Slīpuma, nobīdes, saraušanās un izstiepšanās automātiska regulācija un pielāgošana
    • Papildus apgaismojums metalizētiem materiāliem

  • CORONA APSTRĀDES SISTĒMA

    • Papildus pieejamā in-line sistēma ļauj izmantot plašu mediju klāstu
    • Uzlabots lakas lipīgums, kas maksimāli uzlabo digitālo izdruku lakošanas kvalitāti
    • Papildus iespējams pievienot ozona filtra skapi

  • VIDEI DRAUDZĪGA LED ŽĀVĒŠANAS FUNKCIJA bez ozona

    • Žāvēšana un cietināšana "kustībā" ar integrētām LED diodēm
    • Nav nepieciešams papildu žāvēšanas laiks
    • Bez ozona un bez karstuma, pateicoties LED tehnoloģijai
    • Zems enerģijas patēriņš

  • Augsts drukas ražīgums vienā piegājienā

    • Līdz 2077 A3 formāta loksnēm stundā ar lakas biezumu 21 µm (2D/flat režīms)
    • 1,260 A3 loksnes stundā drukājot laku 3D režīmā ar lakas biezumu no 51 µm
    • Līdz 547 A3 loksnes stundā drukājot laku 3D režīmā ar lakas biezumu no 116 µm (3D režīms)

  • JAUDĪGS PROGRAMMATŪRAS KOMPLEKTS

    • Darba uzdevumu pārvaldnieks "On-the-fly" režīmā
    • Darba stacijas attēlu redaktors
    • Dažādu rakstu/zīmēmjumu katalogs
    • Darbu izmaksu kalkulators, kas aprēķina ražošanas izmaksas pirms drukas
    • Intuitīva darbība ar sistēmu
    • Novērš klientu pirmsdrukas problēmas
    • Ietaupa laiku un naudu

  • UNIVERSĀLĀ LAKA

    • 2D un 3D lakas ar spīduma efektu
    • Starp darbiem nav jāmaina laka vai jātīra iekārta
    • Laka iepakota 10L tvertnē

  • LAKO GAN DIGITĀLĀS GAN OFSETA IZDRUKAS

    • Digitālo toneru iekārtu izdruku lakošana bez laminēšanas
    • Ofseta izdruku lakošana
    • Precīza reģistrācija no lapas uz lapu ar mākslīgā intelekta SmartScanner® tehnoloģijas palīdzību
    • Ātra un vienkārša iestatīšana un darbu izpilde, kas atbalst digitālās drukas biznesa modelim

Specifikācijas un lejupielādes

Specifikācijas un lejupielādes
Technical Specifications
Printing technology Konica Minolta’s exclusive inkjet engine technology;
Drop-on-Demand (DoD) technology; piezoelectric printheads,
developed and manufactured by Konica Minolta;
single pass printing; flexible and scalable printing architecture
Coating thicknesses Depending on your file, the inks used and the type of surface of your sheet, the coating thickness can vary. On laminated and aqueous coating: 21 μm – 116 μm for 3D raised effects and tactile finish. On toner and coated paper: 30 μm – 116 μm for 3D raised effects and a tactile finish
Production speed In 2D/flat mode: Up to 2,077 A3 sheets per hour (with 21 μm)
In 3D/raised mode: Up to 1,260 A3 sheets per hour (with 51 μm)
Up to 547 A3 sheets per hour (with 116 micron)
Registration SmartScanner coupled with Artificial Intelligence (AIS) for fully automated sheet-to-sheet registration process in real time.
No crop marks required.
Formats Min. 21 x 29.7 cm
Max. 36.4 x 75.0 cm
Max. printable width 35.3 cm
Substrate thickness Min: 135 g/m2 and not less than 150 μm or 6 mil before printing
and lamination; Max: 450 g/m2 and not more than 450 μm or
18 mil before printing and lamination; Motorized height adjustment
of print heads
Substrates* Printing on most matte or glossy laminated surfaces, with or without aqueous coating, layered paper, plastics, PVC and other coated materials.
Varnish on toner Spot 3D One coat directly onto most digital prints with no lamination or coating required.
UV coatings and capacity Varnish delivered with a 10-litre tank capacity
High capacity automatic feeder Processes a paper stack of up to 28 cm;
2,500 sheets at 135 g/m2
Paper tray Handles a paper stack of up to 15 cm or approximately
1,250 sheets at 135 g/m2
Accepts all paper formats from A4 up to 36.4 x 75 cm
Paper path 100 % flat paper path; vacuum feed system; air feed system;
automatic double sheet detection; inline LED dryer;
on-the-fly drying and curing via integrated LED
Maintenance & remote technical support Daily maintenance completed in less than 10 minutes; majority of procedures is automated; automatic cleaning system; from cold start to production in less than 10 minutes; remote troubleshooting and support via included video/web camera (high speed internet connection required)
Operator panel Integrated user-friendly LCD touch-screen
Options Automatic PDF File Converter (including RIP); VDP barcode camera (requires Automatic PDF File Converter); AIS SmartScanner Lighting for metallized substrates
Additional Option Corona One for AccurioShine 3600
Ozone Filter Cabinet for AccurioShine 3600
Dimensions (L x W x H) 4.02** x 1.41 x 1.80 metres; 1 metre clearance required on all 4 sides
Weight ± 1,200 kg
Electrical requirements V: 220-240V 50-60Hz; A: 20; plug: 2 plugs CEE 17 IP44 32A (32A
250V, 1P+N+PE); RCD 30mA; C curve 32A breaker
Operating conditions Temperature: 18 to 30°C
Relative humidity: between 30 – 55% (no condensation)
Respects the environment Eliminates resource waste (electricity, paper and varnish); no plates (offset) or screens (screen printing); no cleanup or preparation between jobs; drastic reduction in use of consumables and bulk packaging; coating without volatile solvent.


The default sheet format is A3, unless otherwise stated
1) with an additional option installed
2) speed will vary according to printing parameters used
3) confirm substrate/toner compability with Konica Minolta
* The used substrate needs to be either coated or laminated.
Otherwise the media will absorb the varnish and the desired effect might get lost.
** No paper extensions available.
 
  • All specifications refer to A4-size paper of 135 gsm quality.
  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications and network protocols as well as network and system configurations.
  • The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size (5% coverage of A4). The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
  • All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

AccurioShine 3600 brošūra

In the printing industry, speed and cost are the two most important factors for the success of a business. Now, thanks to the AccurioShine 3600, you have a new ingenious tool to meet the demanding needs of today’s printing requirements and take care of the business end of your company. As a standalone solution, the AccurioShine 3600 adds 2D and 3D gloss effects at a reasonable cost and without the complicated steps of conventional systems. Fully digital, featuring industryleading automatic scanning technology and an eco-friendly LED dryer, all at an impressively compact size, the AccurioShine 3600 allows you to offer your customers a full range of high-impact finishing effects, while raising profit margins as well.

LEJUPIELĀDĒT BROŠŪRU

Sazināties